|
|
|
| USD $ 95.99 |
| EUR € 79.65 |
| GBP £ 65.97 |
| CHF SF 96.28 |
| AUD $A 97.83 |
| JPY ￥ 7754.05 |
Product Description
YN560 is a bran-new flash specially designed for professional creative photography. Compared with YN460-II and YN460, it has the following bran-new features:
A bran-new appearance: The bran-new appearance looks more beautiful, creditable, comfortable and professional.
New power zoom function: By pushing the button on the flash, it can make the flash covered focal length range from 24 to 105mm.
GN58 @ ISO100, 105mm: YONGNUO gives YN560 a higher guide number which reaches the level of the mainstream hot shoe flashes.
The improved wireless triggering sensor: YONGNUO improves the wireless triggering sensor for YN560, which makes the S1 and S2 mode can be used in outdoor environment and the wireless triggering distance is as long as 15m..
Sound indicator: When the charging process is finished, the flash will give a tick sound, so you may concentrate on the creation process. (Note: the sound can be closed).
New charging socket for external power pack: YN560 adds a charging socket for external power pack, to meet your higher demand for charging recycle.
New PC synchronous port: YN560 adds a standard PC synchronous port, which makes it simpler for you to use the PC synchronous line.
Super speed of charging recycle: It only takes 3 seconds in charging after full power output.
Even without new batteries, you can get the super charging speed that it only needs 4~5 seconds;
so you can completely get rid of the nightmare of anxious waiting for charging.
In addition, you can use the external power pack to accelerate the charging speed once more.
Supporting high-speed continuous shooting: Under the output level of 1/8 or below,
YN560 can support the 8FPS high-speed continuous shooting.
The improved power saving mode: YONGNUO designs the power saving mode for YN560.
In the power saving mode, the flash will get automatic shutdown sooner; in the non-saving mode, it will take a longer time before automatic shutdown.
The more fine output control: The output control of YN560 is more fine,
which ranges from 1/128 to 1/1 and each class of flash output has 8 small fine tuning stalls;
With its zooming flash head, YN560 makes you nearly achieve your anticipant lighting effect.
The automatic setting saving: YN560 can automatically save your current setting.
This YN-560 can NOT work on TTL mode
Model information |
|
Output specs |
|
Guide Number (m) |
39 (ISO 100, 35mm) |
Manual Power Settings |
1/1 – 1/2 – 1/4 – 1/8 – 1/16 – 1/32 – 1/64 – 1/128 |
Flash duration (full power) |
1/200 |
Recycle time specified
|
3 sec alkaline |
Triggering |
|
Standard flash foot |
standard |
PC Synch Port |
yes |
Optical Slave |
2 modes (1 w/ pre-flash suppresion) |
Other trigger |
none |
Standby mode |
can be adjusted (30 mins max) |
Flash head features |
|
Swivel |
-180 to +90 degrees |
Tilt |
-7 to +90 degrees |
Manual zoom head |
(18) 24-105 |
Motor zoom |
no |
2nd reflector |
no |
LCD display |
no |
Power supply |
|
Batteries used |
4 x AA |
External power source |
Yongnuo SF-18C or SF-17C |
Nikon TTL |
|
D-TTL |
no |
i-TTL |
no |
CLS wireless slave |
no |
CLS wireless master |
no |
Canon TTL |
|
E-TTL |
no |
E-TTL II |
no |
E-TTL(II) wireless |
|
1. Reflection board
2. Wide-angle diffuser (It can be connected to SF-18C or SF-17C external power pack)
3. Flash light’s head
4. External power pack socket
5. PC port (for input)
6. Contact cover
7. Battery chamber’s cover
8. Optical control sensor
9. Locking ring
10. Hot shoe stand
11. Hot shoe pin
12. Mode indicator (M,S1,and S2): It indicates the current flash mode
13. Output lecel indicator: It can regulate the output power by setting the button;there are 8 levels for output level adjustment.It indicates the output power and the fine-tuning; it indicates the coverage of the current focal length when adjusting the focal length.
14. The sound switch: A short press will enable or disable the sound indicator;hold the button to turn on or turn off the power saving mode.
15. Mode switch button: The mode of the flash light will be switched among the M/S1/S2 in circle for each press
16. Charging indicator / Test button: The lighting of red light shows that charging process is finished and flash can be used; the lighting of green light shows thatit is in charging or a shortage of power; the alternate flashing of red and green lights shows overheat protection. If you press this test button(PILOT),the flash will give a test flash.
17. Power Save nidicator: A long-time lighting indicates that the power saving mode is disabled;a longtime non-lighting indicates that the power saving mode has been enabled;when the power saving mode is enabled,the power save indicator will flash which shows that it has stepped into the dormancy state.
18. Flash head manual motor zoom: You can adjust the zoom range by setting [+] and [-] key (24,28,35,50,70,80,105mm).
19. Power switch: the power of the flash light can be opened or closed by holding this button for 2 seconds.
20. Power adjustment button: Adjust the power output by [LEFT] [RIGHT] and make fine tuning of the current power output by [UP] [DOWN] and [OK] in the middle.
Specification:
Circuit design |
Insulated Gate Bipolar Transistor(IGBT) |
Guide Number |
58 meters (ISO 100,105mm) |
Flash mode |
M, S1, S2 |
Zoom range |
24, 28, 35, 50, 70, 80,105mm |
Vertical rotation angle |
-7~90 degrees |
Horizontal rotation angle |
0~270 degrees |
Power supply |
4×AAsize batteries (Alkaline or Ni-MH are usable) |
Lighting times |
100~1500 times (AA alkaline cell used) |
Recycle time |
approx 3s (AA alkaline cell used) |
Color temperature |
5600k |
Flash time |
1/200s~1/20000s |
Flash control |
8 levels of output control (1/128~1/1), 57 levels of fine tuning |
External interface |
hot shoe, PC port and eternal charging port |
Wireless triggering distance |
20~30m indoor, 10~15moutdoor |
|
Additional features |
The electronic flash head zooming, sound indicator, automatically saving setting, PC port, power saving mode and over heat protection |
Dimensions |
60×190×78mm (Extended state) |
Net weight |
350g |
Acessories |
Flash light(1), protecting bag(1), mini stand(1) and manual(1) |
Package including:
1 x YN560 Flash Unit
1 x Mini Stand
1 x Protector Bag
1 x English manual
- All listing descriptions as indicated above are based on manufacturer’s packing information. Please read through all descriptions and terms before placing a bid.
- We reserve all right to refuse high bidders having negative, hidden feedback, all non-registered bidders or bidder with unpaid history.
- Please DO NOT bid if you don't agree with our terms.
- Payment is expected to be completed within 3 days after auction closed. Unpaid auction will be forfeited and eBay may suspend unpaid buyer account.
- All items are sent out as “other” format.
- Item(s) will be shipped out within 2 working days (expect Hong Kong public holiday and Weekend) after receipt of a verified payment.
- No local pickups are allowed.
- Hong Kong Post Office will provide any tracking number for normal international airmail. It is highly recommended the buyer to pay insurance (sent by registered mail with tracking number provided) if the buyer wants the item being insured. We are not responsible for any loss of the mail if the item is not insured.
- We only ship the item(s) to the address according to eBay information. Buyer should make sure their shipping information (include door no and shipping address) in eBay platform is correct. We are not responsible for any loss of the mail if the shipping information is incorrect.
- We do not ship the item(s) to P.O. Box. We will not take any responsibility for the loss of the mail if buyer insists on shipping the item to P.O. Box.
- Please contact us in the period of 28 to 35 days from dispatched if you don't receive the item(s). Otherwise, we would assume that the item(s) has been received.
- All transactions are final and no refund will be given. The only case to return the item is the defective or wrong item.
- Defective or wrong item will be offered replacement only, no refunds or credits will be given.
- All defective situations must be reported within 3 days upon receipt of the items. After our confirmation of item returning acceptance, the item must be returned as a resalable appearance with original packing to our side within 28 days from the date of our confirmation of item returning acceptance.
- All returned items must be marked with eBay ID, buyer email address, item number and returning reasons (in English) for our process. It may take up to 5 working days to process the returned item(s) after receipt. If you do not mark above information for us, we are not able to follow up your case.
- Buyer should be responsible for the shipping fee of returned item(s), and we will bear the postage fee of resent item(s).
- Shipment fee and insurance are not refundable in any case.
- All sales for personal care product are final, returns are not possible due to hygiene reasons.
